Bowfishing With Trolling Motor

5 Tips On How To Bowfishing With Trolling Motor

Introduction Bowfishing With Trolling Motor

Bow fishing is the kind of fishing that involves the use of a bow and an arrow to capture fish. This article explains how to bow fishing with trolling motor because it is fun and engaging experience. This way of fishing is not done by people for a great catch of fish for commercial activities or anything of that sort.

Bowfishing with trolling motor is one of the best experiences when hunting for fish such as carp, salmon, bass, tilapia and many more.

If you want to bow fishing, you need to install a trolling motor. Trolling motor is a motor that will be installed on your fishing boat which is equipped with an outboard motor.

The trolling motor can attach to the bow of a boat so it would follow behind as you row, paddle, or ski alongside.”

-If we want to install the trolling motor for our bow fishing hobby then there are some things we need to do first before installing if like this one because without those preparations and requirements for installation it may not work well later in the future.

Even though both steps are important, but safety precautions should take precedence even at higher costs than others; such as when using electricity. You must make sure that your power supply is 220 volts 60 hertz alternating current (AC) preferably from dedicated service wiring and circuit.

You can also use trolling motor batteries by powering the trolling motor through a battery charger.

-It is important that you take safety precautions with your fishing equipment, and always use caution when using electricity near water or any other electrical devices.

it is a mechanical device that can be used as an engine for boats and ships. It’s powered by batteries, solar cells, or other sources of electrical power

the wheel spins around at high speed in water from one direction to push the boat forward on its course

it has two propellers that work together to propel it through the water.

Bowfishing using trolling motors can be used to hunt fish.

it’s a long, thin shaft that is used to propel an arrow or other projectile by hand as far as possible from the archer with maximum speed and force

a crossbow can be used in hunting instead of bow fishing if you want more accuracy when shooting at longer distances

The only downside is that they are not good for people who have physical limitations such as arthritis or joint problems because it requires some strength to draw back the string and hold the weapon steady while maintaining aim on target until release.

The trolling motor that you are using must be handle and can be controlled using the foot because it is easy to navigate especially on shallow water. Bowfishing during the shallow water also must be done in careful to avoid any problems in the future.

It is a sport mostly done by people during their leisure time for fun. Trolling motors are used to hold the boat in place, control it and sometimes propel it. They are important when one is practicing bow fishing. Here are five tips to ensure you catch a fish when using a trolling motor.

There are also videos at Youtube.com explain regarding bowfishing with trolling motor

Know the types of motors that are there when Bowfishing With Trolling Motor

Prices pulled from the Amazon Product Advertising API on:

This knowledge is important since when one knows the types of trolling motors, their advantages and disadvantages and under what circumstances they can be used best, one can choose from them the one that they see fit for their course. For instance, there are three known types of motors; engine mounts motors, transom mount motors and bow mount motors. Each one of these motors has different characteristics that define them and the ways in which they function best.

When bow fishing in a small river or a stream one may opt to use bow mount motor instead of transom mount motor since the latter works best with big boats. Also, the knowledge of the types of trolling motors allows one to study them well and learn the installation process which is relevant. This is because when one plans to go bow fishing one needs to install their motors properly, that way it will work efficiently.

Purchase the right motor for the right water-body when Bowfishing With Trolling Motor

Some water bodies are fresh while others are salty. There is freshwater trolling motor and saltwater trolling motors. Salt water motors can work well in fresh water and the vice versa is true. The challenge comes in when one is planning to use their trolling motor for a long time but they keep using it in salt water when its made to be used in fresh water. Trolling motors made to be used in fresh water, are made with less metal and when used in salt water during bow fishing, they wear out faster than usual.

Therefore, for one avoid buying a trolling motor after short periods of time, one should buy the right motor for the job just once and use them rightly. Also, purchasing the right trolling motor means that one will use the right maintenance strategies to sustain it.

Wash and keep the trolling motors clean every time after Bowfishing With Trolling Motor

It is always possible that one practices bow fishing in different rivers, lakes, streams, and ponds at large. Each of these places has different conditions surrounding them. Some are fresh others salty, others are full of reeds and aquatic plants that grow all the way above the water while others are purely clean. After visiting a waterbody, it is important to wash the motor since sometimes the small pebbles from the water, some reeds and mud may get stuck inside the motor.

These things, when not removed from the motor through cleaning, they will most likely interfere with the efficient working of the motor when it is to be used again. Also, a motor that is from being used in a salty water body or a water body full of particles and reeds, when used in a clean water body, it will interfere with the conditions around that place and the fish may not come near the boat. In the end, there may be no catch at all.

Ensure that the power used to run the motor is low and limited.

It is obvious when one decides to go bow fishing, one is most likely to fish in shallow point of the water body. This is because, in deep places like oceans, seas and the middle of the lake, one will most probably not see the fish at all. These shallow places only require low power. High power will make the boat move so fast so there will be no time to see the fish and shoot it with the bow. It will also disturb the fish and spook the fish. Using high power in these shallow areas also makes too much noise.

Trolling motors are usually powered by batteries. When running they make a lot of noise. This noise may scare the fish away, thus they will not emerge near the boat for them to be caught. It is also obvious that when one is bow fishing in shallow areas, they are using a small boat. The small boat works best when they are controlled and propelled by a low powered motor.

Keep the trolling motor greased and oiled in movable parts.

A trolling motor is something made with metal and it is used in water. The chances of it rusting is high when not well taken care of. A trolling motor should always be oiled and greased around the pivot and rub points. This is important because these points may lower the efficiency of the trolling motor when not well taken care of and end up rusting.

This is important when one is going for bow fishing because a well working boat will ensure that the person fishing directs their boat with ease and controls it without it getting stuck or the motor breaking down on them in the middle of fishing. It is awfully bad if the motors pivot point refuses to work when they are in the middle of a big catch. The art of bow fishing is made interesting and fun if the trolling motor is working well, a fact that can be attributed if it is lubricated regularly.

Trolling motors may not be a basic tool when one is out for bow fishing but they, to some degree, make bow fishing a whole lot easier. With a trolling bow and the right one for that matter, one can stabilize their boat when they are fishing on a windy day. It also helps one to make sure that the boat is moving at the speed that they need at the time.