How to Build a Deer Stand Tower
Building a deer stand tower can be an enjoyable and rewarding experience. This article will provide you with the resources necessary to build your own deer stand tower from scratch.Deer towers come in all shapes, sizes, and styles.
This article is split into three sections. First, you will learn to construct a deer stand foundation and walls. Second, you’ll build the roof and floor system.
Finally, you’ll be shown how to create an easy way of accessing your deer stand from the ground so that you can take care of any necessary maintenance or repairs without having to leave it! If you want to know more about Deer Stand Tower can visit Youtube.com to study videos about this.
Knowing Where to Build Your Deer Stand
First of all, It’s wise to check with your landowner before setting out on this project.
Many landowners require written permission in order for hunting rights to be granted on their property. If this isn’t the case, check with local authorities about what regulations are in place regarding building structures on private land such as a deer stand tower.
Before getting started, it’s advisable to plan out your deer stand tower. Ideally the structure should be built in an area that receives a good amount of sunlight throughout the day.
Although this is important for aesthetic reasons, it will also ensure that your property and any equipment you leave on it remain visible to other hunters who may come along later.
A good base for your deer stand tower can be constructed using pressure-treated wood or heavy-duty plywood.
The size of the base will depend entirely upon the type of stand you want to build and how big you’re planning on making it. You’ll need a sturdy foundation if you’re building a full-sized tree stand and enough raw materials (plywood/pressure-treated lumber) to create three walls measuring 12 feet by 8 feet (3.8m x 2.4m).
It’s important the walls are constructed of durable materials that will last through multiple seasons. Ensure you allow enough space on either side to create a doorway for entering and exiting your deer stand tower!
Depending upon what type of weather conditions you’re likely to encounter during hunting season, it may be worthwhile to consider building a roof over the top of your deer stand tower.
This is especially true if you live in an area susceptible to rain or snowfall; as this could cause moisture damage to your wall panels which in turn would reduce their longevity and stability.
Attaching a basic wooden roof is easy and can be achieved by using several sheets of plywood (or strong OSB/chipboard).
Features of Deer Stand Tower
In order to make your deer stand tower as functional as possible, you should consider adding the following features:
Shelves – Sufficient shelving should be provided so that you can store any food or equipment safely.
Easily Accessible Ladder – If you are planning on making your deer stand permanently accessible from the ground, then an easy-to-use ladder is advisable.
Ventilation – It may be worth installing a ventilation system into your deer stand if it will be regularly occupied overnight. This is because warm air tends to rise through structures such as tree stands causing condensation and mold growth inside of them.
How high hould I build my deer stand?
The next question here is how high should I build my deer stand?
This would depend largely on the size of your property and how easy it is to access. Obviously, if you live in an area with few trees then you might want to consider building a taller tower to improve your chances.
However, for most properties around 4-6 meters (12ft-18ft) will be more than enough height.
Bear in mind that any tree stands you construct must not exceed the height of locally designated hunting boundaries; which vary from state to state but are usually around 12 feet or 3.8m.
How do you build a deer blind Tower?
The next question here is How do you build a deer blind Tower?
Again, this will depend upon the type of tower you want to construct and its overall size.
In some instances, a simple PVC pipe frame can be built that in turn can be covered in mesh or burlap. This is ideal for small areas as it’s easy to transport and assemble, but offers little protection from harsh weather conditions (rain/snow).
If you’re planning on constructing a fully-fledged hunting stand then it’s advisable to use timber posts instead; these are more durable than PVC pipes and provide you with plenty of stability! You’ll also need heavy-duty netting (8ft x 8ft) to cover your tower if you live in an area where heavy rain or snow.
Best Deer Stand Tower in the market
How do you secure a tower deer stand?
Another common question here is How do you secure a tower deer stand?
Again, this will depend upon the type of deer stand that you’re constructing. A basic PVC pipe frame can simply be attached to trees using rope or straps (or even bungee cords!) and then covered with netting/mesh; as mentioned previously.
But if your tower is going to be taller then you’ll need to consider different methods for securing it to the ground. This could include heavy-duty stakes, metal frames, and so on.
How much does it cost? Cost vs benefits
The final question we should ask ourselves here is how much does it cost /how much money do I need to start building my own deer blind?
Well, the answer is, it depends! In many instances, you can get away with a cheap DIY option that still gets the job done. But of course, this will vary depending upon what type of tree stand you are planning on constructing. It’s worth looking at prices for lumber and metal posts in your area before committing to anything; as if these materials alone make up a significant portion of your budget then perhaps building a PVC pipe frame would be a better option!
How do you secure a deer blind?
The best way to secure your deer stand is by using a metal frame. You can use either 1″ or 2″ galvanized pipe for the frame and attach it firmly to the ground using stakes or some other similar means. Even though you have built up above the tree line, there are still many animals that will try and pull down anything they can reach if given an opportunity.
Conclusion Deer Stand Tower
In a conclusion, I would highly recommend building your own deer stand using this method as it is overall pretty simple and cheap. And you will have something that is a lot better than the ones you buy in the store.
If you need to purchase any of these materials from the local hardware store, maybe look at their website first and see if they offer online ordering where you can find better deals.