If you have a rangefinder that is filled with water, there are a few things that you can do to get the water out. One option is to take the rangefinder apart and remove the battery. Then, using a hairdryer set on low heat, blow dry the inside of the rangefinder until all of the moisture is gone.
Another option is to use a vacuum cleaner with the hose attachment to suck all of the water out of the rangefinder.
Disassembly – Bushnell Rangefinder
- Remove the battery cap and take out the batteries
- Unscrew the screws that hold the rangefinder together
- Carefully remove the lens assembly from the rangefinder body
- Use a bulb syringe or turkey baster to suction up any water inside the rangefinder body
- Dry off all parts of the rangefinder with a soft, lint-free cloth
- Reassemble the rangefinder and replace the batteries
How to Take Apart a Bushnell Rangefinder
Whether you’re wanting to do some maintenance on your Bushnell rangefinder or simply curious about how it works, taking it apart can be a helpful undertaking.
Here’s a step-by-step guide on how to do just that:
1. Begin by removing the screws on the side of the rangefinder using a Phillips head screwdriver.
There should be four screws in total.
2. Carefully remove the side panel of the rangefinder, being careful not to damage any of the delicate internals.
3. Once the side panel is removed, you should see the battery compartment and circuit board.
The battery compartment is usually held in place with a small screw or two – remove these and set aside.
4. With the battery compartment out of the way, you should now have clear access to the circuit board and other internals of the rangefinder. If you’re comfortable doing so, you can now begin removing various components from the circuit board in order to troubleshoot or replace them as needed.
Otherwise, simply reassemble everything in reverse order and your rangefinder should be good as new!
How to Calibrate a Laser Rangefinder
Laser rangefinders are a critical tool for many applications, from surveying to construction to forestry. But like any precision instrument, they require periodic calibration to ensure accuracy. Here’s a step-by-step guide on how to calibrate your laser rangefinder:
1. Check the manufacturer’s specifications for recommended calibration intervals. Depending on the model, you may need to calibrate as often as every few weeks or as infrequently as once a year.
2. Make sure the rangefinder is clean and free of debris.
Any dirt or smudges on the lens will affect the accuracy of the readings.
3. Aim the rangefinder at a large, flat surface like a wall or piece of cardboard, and make sure that nothing is blocking the path between the sensor and target.
4. Use the built-in controls to take a reading at each of three different distances: 10 feet (3 meters), 20 feet (6 meters), and 30 feet (9 meters).
Write down these readings for reference later.
Gogogo Rangefinder Troubleshooting
If you’re having trouble with your Gogogo Rangefinder, there are a few things you can do to try and troubleshoot the issue. First, make sure that the batteries are properly installed and that they have plenty of power. Next, check to see if the lens is clean and free of any debris or smudges.
If everything looks good there, try resetting the rangefinder by pressing and holding the power button for 10 seconds. If none of those things seem to be working, then it’s possible that there is an issue with the rangefinder itself. In that case, you’ll need to contact customer service for further assistance.
Bozily Golf Rangefinder Troubleshooting
If you’re having trouble with your Bozily Golf Rangefinder, there are a few things you can do to troubleshoot the issue. First, make sure that the batteries are properly installed and that they have enough power. Next, check the lens for any dirt or debris that might be obstructing the view.
If everything looks clean, try resetting the rangefinder by pressing and holding the power button for 10 seconds. If your rangefinder still isn’t working after trying these troubleshooting tips, contact customer service for assistance.
Rangefinder Repair Forum
If your rangefinder is in need of repair, you’re not alone. Fortunately, there’s a community of like-minded individuals who are more than willing to help. The Rangefinder Repair Forum is a great place to start.
This forum is packed with information on all things related to rangefinder repair. You’ll find detailed guides and helpful tips from experienced users. And if you have any questions, simply post them in the forums and you’ll get plenty of responses from the friendly community members.
So whether you’re looking for guidance on a specific repair project or just want to chat with others who share your passion for rangefinders, the Rangefinder Repair Forum is definitely worth checking out.
Can a Range Finder Get Wet?
Assuming you are asking if it is okay to get a rangefinder wet, then yes, it is perfectly fine. Most have a rubber or plastic coating that makes them water-resistant. Some may even be waterproof.
However, you should avoid getting the lens of the rangefinder wet as this can cause condensation to form inside and potentially damage the instrument. If the lens does get wet, simply wipe it off with a soft, dry cloth.
How Do You Open a Bushnell Rangefinder?
If you’re like most people, you probably don’t think too much about how your Bushnell rangefinder works. You just know that when you press the button, it gives you a reading in yards or meters. But have you ever wondered how those readings are generated?
Here’s a quick look at how Bushnell rangefinders work: Bushnell rangefinders use what’s called “reflective target ranging.” This means that they fire an infrared laser beam at a target, and then measure the time it takes for the beam to bounce back.
Based on the speed of light, the Bushnell can then calculate the distance to within 1/10th of a yard or meter. So now that we know how they work, let’s take a look at how to open one up. The first thing you’ll need is a Phillips head screwdriver.
Once you have that, simply unscrew the two screws on the back of the unit (one near the top, and one near the bottom). With those screws removed, the back cover should come right off exposing the battery compartment and circuitry inside.
Can Rangefinder Be Repaired?
Yes, rangefinders can be repaired. However, the cost of repair will vary depending on the type of damage and the model of rangefinder. For example, a cracked lens may cost more to repair than a scratched lens.
Additionally, some repairs may not be possible if the damage is too severe.
How Do I Reset My Rangefinder?
If your rangefinder has a reset button, press and hold the button for two seconds. The display will show “RESET” and then return to the previous mode. If your rangefinder does not have a reset button, remove the batteries for one minute, then replace them.
Assuming you’re talking about a water-damaged rangefinder, the best thing to do is to take it apart and dry it out as much as possible. This usually involves removing the batteries, taking off any removable covers, and using a hairdryer on low heat to blow air into all of the nooks and crannies. Once it’s mostly dry, you can put it back together and see if it still works.
If not, you may need to replace some of the parts.