How to Measure a Recurve Bow?-3 Important tips that you must study

A recurve bow is a type of bow that has limbs that curve away from the archer when the bow is unstrung. This article explains about how to measure a recurve bow that important for hunter to know and study about so that can be use during hunting journey.

The term “recurve” can refer to the entire bow, or just the limbs. A recurve bow typically stores more energy and delivers it more efficiently than a straight-limbed bow, making it faster and easier to shoot.

Best crossbow in the market is BARNETT Whitetail Hunter STR Crossbow, Mossy Oak Bottomland, Standard 4×32 Scope

Best recurve bow in the market is Southwest Archery Spyder XL Recurve Bow 

When shopping for a recurve bow, it is important to know how to measure one so that you can find the right size for your needs.

3 Ways To “MEASURE DRAW LENGTH” — Recurve Bow — Longbow — Traditional bow + “BOW GIVEAWAY”

  • Pull the string back until the nock is level with your eye
  • Measure from the string to the top of the riser (the handle of the bow)
  • This measurement is your “AMO length
  • Most recurve bows are between 58″ and 70″ in AMO length

How to Measure a Recurve Bow String

If you’ve ever wondered how to measure a recurve bow string, wonder no more! Measuring the string is actually quite simple, and only requires a few tools. First, you’ll need a tape measure.

Place the end of the tape measure at the center of the bowstring, and pull it taught until it reaches the end of the bow. Make a mark on the string at this point, then measure from this mark to the end of the string. This will give you your string’s length.

Next, you’ll need to determine your bow’s draw weight. This can be done by hanging a scale from the center of the bowstring and drawing back until the arrow rests against your jawbone. The amount that the scale reads is your bow’s draw weight.

Write this number down so you don’t forget it! Now that you know these two numbers, you can easily calculate your bow’s brace height. To do this, simply subtract your string length from your draw weight.

The resulting number is your brace height! With all of this information in hand, you’re now ready to shop for a new recurve bow string with confidence!

Prices pulled from the Amazon Product Advertising API on:

How to Measure Bow Length

When it comes to choosing the perfect bow, size matters! But how do you measure bow length? Here are a few simple tips to help you get the right measurement:

1. Start by holding the bow in your nondominant hand. This is the hand that you will use to draw the string back. 2. Next, extend your arm out straight in front of you and align the center of the bow with your eyes.

3. Finally, measure from the tip of your nose to the end of thebow. This is your ideal bow length!

Recurve Bow String Length Calculator

If you’re shopping for a recurve bow, one of the things you’ll need to know is the proper string length for your bow. There are a couple different ways to go about this, but the easiest is to use a recurve bow string length calculator. There are a few different factors that go into choosing the right string length for your bow, including the size of your riser (the middle section of the bow), the shape of your limbs (round or rectangular), and your draw weight (the amount of force required to draw the string back).

Using a calculator takes all of these factors into account and gives you an accurate measurement for the perfect string length for your recurve bow. Once you have your desired string length, all that’s left to do is find a reputable dealer or manufacturer and purchase your new recurve bowstring!

How to Measure Brace Height on a Recurve Bow

When it comes to choosing a recurve bow, one of the most important factors to consider is brace height. This is the distance between the string and the belly of the bow, and it plays a big role in how your bow will perform. A shorter brace height will make your bow more powerful, while a longer brace height will make it more forgiving.

So how do you know what brace height is right for you? Here’s a quick guide on how to measure brace height on a recurve bow. First, find the center of the bowstring.

You can do this by holding the string at each end and finding the point where they meet in the middle. Once you’ve found the center, measure from there to the belly of the bow at 4 inches (10 cm) below where the arrow rests when nocked. This measurement is yourbrace height.

Now that you know how to measure brace height, it’s time to choose a recurve bow that’s right for you. If you’re just starting out, we recommend going with a longer brace height so that your shots are more forgiving. As you become more experienced, you can start experimenting with shorter braces heights for more power and precision.

Prices pulled from the Amazon Product Advertising API on:

Recurve Bow Brace Height

When it comes to archery, one of the most important aspects is finding the perfect brace height for your recurve bow. The brace height is the distance between the string and the grip of the bow. It’s important to find a balance between too long and too short of a brace height, as this can affect accuracy and consistency when shooting.

The general rule of thumb is that the shorter your draw length, the shorter your brace height should be. This is because a shorter brace height gives you more leverage on the string, making it easier to draw back and release with precision. Conversely, a longer brace height will make it more difficult to control the string and can lead to inaccuracies in your shots.

There are a few different ways to measure yourbrace height. The first is by using a ruler or tape measurer to physically measurethe distance from thestringtothegripofyourbow. Another wayisbydrawingthebowstringbacktoitsfull extentandmeasuringthedistancebetweenthe stringer rest (where your hand would go) and thenock point (where arrow rests).

This method ensuresthatyouare getting an accurate measurementof actualbraceheight ratherthan just an estimate. Once you have determined what size bracelet you need, it’s time to find one that fits both your style and budget. There are many different brands and materials available on the market today, so take some time to research before making your final purchase decision.

How to Measure a Recurve Bow ?


How Do I Measure the Length of My Recurve Bow?

There are a few different ways that you can measure the length of your recurve bow. The most common way is to measure from the tip of the bow to the back of the grip. This will give you your bows AMO (Archery Manufacturers Organization) length.

Another way to measure your bow is to stand it up on its end and measure from the ground to the top of the bow. This will give you your ATA (American Target Archery) length. The last way to measure your bow is by measuring from one tip, across the riser, and to the other tip.

This measurement is called your brace height and is typically between 7-9 inches for a recurve bow. To find out what size arrows you need for your bow, you will need to know two things; first, what draw weight yourbow is and second, what arrow spine stiffness (also known as arrow flex) you should use for that draw weight. You can find this information in most archery shops or online retailers that sell arrows.

How Do You Know What Size Recurve to Get?

When choosing a recurve, it is important to select the correct size. The size of the recurve will be determined by your draw length. To measure your draw length, extend your arm fully and measure from the tip of your middle finger to the inside of your elbow.

This measurement should be taken with a tape measure or ruler. Once you have this measurement, you can use a size chart to determine what size recurve you need. It is important to choose a recurve that is comfortable for you to shoot.

If you are new to archery, it is recommended that you start with a smaller bow and work your way up as you become more comfortable with shooting.

What Size String Do I Need for a 60 Inch Recurve Bow?

When choosing strings for a recurve bow, you will need to take into account the length of your bow. For a 60 inch recurve bow, you will need a string that is at least 60 inches long. The string should also be made of durable material that can withstand the wear and tear of shooting arrows.

When selecting a string, it is important to choose one that is the right weight for your bow. A heavier string will provide more power when shooting, while a lighter string will be easier to draw.

How Far Can a 25 Pound Recurve Bow Shoot?

A 25 pound recurve bow can shoot an arrow up to 180 yards. The type of arrow and the weight of the arrow will affect how far the arrow will travel. A lighter weight arrow will travel further than a heavier one.


In order to measure a recurve bow, you will need the following items: a tape measure, an arrow, and a quiver. First, extend the tape measure along the side of the bow. Next, place the tip of the arrow on the edge of the bow where it meets the riser.

Finally, holding the quiver in your other hand, align it with the top of the bow so that it is level with your eyes.

More informations