How to Make a Recurve Bow

Learn on How to Make a Recurve Bow: 6 Important tips that you must learn

Introduction How To make a recurve bow

The popularity of recurve bows is increasing due to their versatility. Longbows are strong and aid in powerful draws but they can be weird in certain environments such as in extreme heat conditions. This article will explain about How To make a recurve bow that can be used as the guideline and reference for hunters.

How to make a Recurve Bow:

  • Know Your Material
  • Learn the Technique
  • Gather the Materials and Tools
  • Prepare the Stave
  • Prepare the Strings
  • Finishing your recurve bow

Making a recurve bow is very challenging if you do not know the trick and tips. Learning how to create homemade crossbow and homemade recurve can give you valuable experience that can be used in the jungle.

Do you want to buy best crossbow in the market? Our recommendation is BARNETT Whitetail Hunter STR Crossbow, Mossy Oak Bottomland, Standard 4×32 Scope

There are many resources available on the internet that explain the techniques of how to make a recurve bow. When you decide to make recurve it is very important you know the components and materials to create recurve bow.

Recurve bow can be created using the PVC or any materials that can be bend easily. One of the components it called risers or handlers that can pully the string and arrow rest.

When you pull the strings it will then transfer the energy to the limbs and release the arrow forward. it should be noted here if you are beginners you must use the the limbs that graded into poundage around 28lb and if you are pro you can use up to 40lb.

The poundage represent the force and energy that you can pull the riser to withstand the limbs.

When creating recurve bow you can also use Blackwood that is laminated and this can be stable compared to PVC

Learn the technique

Recurve bows, on the other hand, provide a similar pull weight and can function in all conditions. These bows are versatile and easy to work with due to their short length.

To make a recurve bow, the following steps should be followed;

Gather the materials and tools

The main materials to get are the bow stave, pencil to be used for marking, sandpaper to smoothen the surfaces, cord to make the string and a finishing material to vanish the bow.

The main tools required are knife, ax, measuring tape, a saw, and a scraper.

Prepare the stave

Find a tree branch that has a diameter of between 15 and 20 cm. Using an ax, cut it to the required size. If you do not have access to a tree, you can get wood that can curve from your local store.

After you remove bark from the tree, apply some glue on its ends to prevent it from cracking as you store it for about 3 weeks for it to dry properly.

Create a design on How to Make a Recurve Bow

Once the wood is dry, shape it in such a way that you will only remain with the ring part of the wood. You will then draw out a careful design with the parts that you will need carefully carved out. Remove the unwanted parts using a chisel.

Bend the Stave

This is the most important stage. You should start by placing the bow’s back on your foot as you hold the handle with the other hand. Close the gap between the top and the bottom parts of the bow and bend the stave gradually to avoid too much pressure on it as it can cause it to break. You should try and bend it to about 15 to 20cm.


Before the strings are put, you should put notches on the ends of the stave that will hold the strings together. The internal parts of the tips will help in the creation of the notches that will protect the outer edges.

After this, place the string by creating a loop around the edge of the stove strong enough to prevent it from untying.

From here, put the stave on a supporting stick to help in the bending of the stave. The process of bending takes several months to enable it to be strong and natural. If you do not give this process enough time, the stave may break and it may not last long.

Finishing on How to Make a Recurve Bow

To finish off, you will add the laminate from wood or fiberglass. You will need glue and saw to cut out the wood for this process to be successful. It is also at this stage where you can add any desired artwork.

In conclusion, the performance of the recurve bow depends on the construction process which if well followed will result in a durable and reliable bow.

Prices pulled from the Amazon Product Advertising API on:

More informations