Homemade Arrow

What You Must Know About Homemade Arrow

Information about Homemade Arrow

Hunting using a bow and an arrow is challenging because it involves manually pursuing an animal’s trail in the jungle. This article explains about Homemade Arrow that is important for you to know how to make Homemade Arrow at home.

How You Want To Create Homemade Arrow

The hunting experience can be further enhanced by making your arrows with the same materials as the American Indians did. The process can be quite involving but also has a lot of fun in it. Using handcrafted items to hunt has a great feel than what the other materials available in the market offer. Also, the pride and joy in hunting using your custom made arrows is immeasurable.

These are the steps you will follow in making your homemade arrows;

Understand the different parts of an arrow in a homemade arrow

Arrowhead-This is the sharp tip that causes the damage. It is mainly made out metal and its skinny, broad, and razor-sharp for it to penetrate the target.

Fletching- This is the thin blade of feathers that control the arrow flight trajectory. The fletching helps your arrow in moving ahead in a straight manner just like you intend.

Shaft- This is the long and skinny that connects the arrowhead and the fletching. It holds the arrow together.

Nock- It is a notch that is located at the back or base of the arrow which connects the arrow to the bowstring thus completing the process.

Making the Arrowhead

The arrowhead can be made from a variety of materials such as stone, glass, rebar, light metal. You will choose the material that is easy to work with and easily available to you.

Using a hammer, create triangular pieces that are at least 2 inches long and 1 inch wide.

Once the pieces are in place, you need to sharpen them by grinding them using a stone or sandpaper until they are razor sharp.

Making the Arrow Shaft

The arrow Shaft is made from light wood. Measure a length of between 35 to 40 inches and a width of between 8 and 10 inches. These are the best dimensions for the arrow Shaft.

The arrow Shaft must have balance and symmetry. The wood you choose should not have any imperfection such as knots or warping to create the best balance.

Once you have the arrow Shaft cut out, use an arrow spinner to check its balance and straightness.

Making the fletching

The most commonly used material is feathers but you can also use duct tape if feathers are not available.

Measure a distance of about 1 inch which should separate the nock and the fletch. Once you have determined the location of the fletch, take your glue and fix the feathers on the arrow Shaft on all sides. For the best results, you can use a fletching jig which can be made at home.

Making the nock

The nock is the slit located at the end of the arrow shaft.

To create the nock, use a sharp and thin tool in your workshop to slit it through. Make sure to mark out the sections where it will reach. Also, ensure that the slit area is in the middle of the arrow shaft to provide a balance of the arrow.

Piece all homemade arrow together

Once everything is ready, you now have to piece them together. The backside of the arrow will be complete because you will have done the nock and installed the fletching. Therefore, only the arrowhead will need to be fixed and you will have the arrow complete for testing.